K B Enterprises

Smart Logic based Real Time PFC (RTPFC) is a direct replacement of the traditional APFC using contactor-based logic with the advantages of smart switching technology. Like an APFC, the primary function of the  RT- PFC is reactive compensation.

However, the correction is completely, instantaneous, and precise. We can obtain more than 8-10 switching in less than a second of time and is most suitable and reliable solution for Unbalanced loads like Welding loads, Single Phase issues and leading PF cases.

Electrical tape (or insulating tape) is a type of pressure-sensitive tape used to insulate electrical wires and other materials that conduct electricity. It can be made of many plastics, but PVC (polyvinyl chloride, "vinyl") is the most popular, as it stretches well and gives effective and long-lasting insulation.

Heavy Panel Boxes available in different sizes with base plates. Customised panel boxes are also available on request

Additional Information:

• Delivery Time: exstock subject to prior sale

The electrical power meter, Xpert is a micro-controller based unit which measures various electrical parameters, and sequentially displays on a 128X64 backlit LCD.

The unit measures the three phase voltages, currents, frequency, power factors, individual Harmonic data as Histogram including Total Harmonic Distortion as well as individual current and voltage waveforms for all three phases. Based on these inputs, the system KVA, KW and KWh can also be calculated.

For the correct operation of the unit, the only basic care required is to ensure that the phase sequence of the three phases is R-Y-B and the polarity of the CT secondary is correct.

The unit is fully solid state and will give years of trouble-free service once installed correctly.

E3000 is a polyphase whole current ( 30A or 60 A ) digital KWh meter , with RS485 port connectivity.

BMM (Blind Measuring Module) is multi functional unit which supports only 3P4W installation. BMM take 3 Voltage inputs & 3 Amps inputs for measurement. BMM measures phase wise Voltage, Amps, PF, Power as well as System Power, Energy,Frequency. For demand calculation BMM has Fixed 30 Minute window, based on Real Time Clock for KW as well as KVA.

BMM provides one RS485 port with Modbus-RTU protocol to communicate with external world. As BMM receive any data over RS485 then “RxD” led will glow and if BMM is responding over RS485 then “TxD” led will glow. As unit power up, “POWER” led glows.

BMM provides pulse on led (1000 Pulse/KWh) as well as on isolated opto coupler.

Smart Card based Pre-paid metering system using E5000.

E5000 is a polyphase whole current (30A or 60 A) digital KWh meter, with three relays capable of cutting the power connection to the load.

The Empower Plus from Trinity is an easy-to-use, cost effective electrical power meter that offers all the basic measurement capabilities required to monitor an electrical installation. In addition to measuring the instantaneous parameters, it also measures all three energies, thus helping to measure energy costs.

Over the basic metering, it provides RS485 port supporting MODBUS RTU protocol, THD measurements, Phase angle, Unbalance % for Voltage and Current, On Hour & Run Hour, Power Interruption recording. These parameters are available over RS485 only.

The CT Primary, Secondary and PT ratios are site selectable.

The Power Pro from Trinity is an easy-to-use, cost effective electrical power meter that offers all the basic measurement capabilities required to monitor an electrical installation. In addition to measuring the instantaneous parameters, it also measures accurately all three energies, and also demand, thus helping to measure and control energy costs.

Over the basic metering, it optionally provides two relay outputs, RS485 port supporting MODBUS RTU protocol, dual source metering and THD measurements.

The relays are site programmable for parameter of action, and the value on which to operate.

The CT primary and secondary, PT ratio and installation type are site selectable, thus making it possible to use the meter in all types of three phase installations.

Trinity introduces the XPERT-PLUS, an easy-to-use, accurate and very versatile electrical power meter with innovative features, which is ideal for remote monitoring of electrical installations, Energy accounting and management, Demand Control, tenant billing and Power quality analysis.

The meter has three LEDs in the front, one to calibrate energies, one to indicate the status of RS485 communication and one to indicate load on DG.